Unlock Security Code using Memory Card

Steps to unlock ur sec code.
1. Off Ur mobile.
2. remove battry
3. remove memory card
4. On ur computer and plug in ur memory card.
5. insert ur memory card.
6. unzip the attachment file and place it to ur memory card
e:\system\recog
7. now insert ur memory card into ur mobile and switch on the fone.
8. now if it ask for code type 12345 and ur mobile unlocks.
9. Every times u restart ur mobile it will unlock ur mobiles security code.


Reset Nokia Security Code

So you don't know or you have forgotten your Nokia Security code? No data cable needed with this new solution.

So what is a master code?
Well lets assume you have forgotten your security code. The master code is a 10 digit number that will always be accepted as if it were your actual security code.

You can then use the master code to change your security code back to what ever you like. When your Nokia handset asks you for the security code simply enter the master code.

Will work on all of DCT3 generation, like:
2100, 3110, 3210, 3310, 3315, 3330, 3350, 3390, 3410, 3610, 5110(i), 5130, 5190, 5210, 5510, 6080, 6110, 6130, 6138, 6150, 6190, 6210, 6250, 7110, 8210, 8250, 8290, 8850, 8855, 8890, 9110(i), 9210(i), 9290.

Will work on most of DCT4 generation, like:
3100(b), 3108, 3120, 3200(b), 3220, 3230, 3300, 3360, 3510(i), 3530, 3590, 3595, 3600, 3650, 3660, 5100, 5140(i), 6020, 6021, 6100, 6101, 6108, 6200, 6220, 6230(i), 6260, 6310(i), 6500, 6510, 6590, 6600, 6610(i), 6620, 6650, 6800, 6810, 6820, 6822, 7200, 7210, 7250(i), 7260, 7270, 7280, 7600, 7610, 7650, 7700, 7710, 8310, 8390, 8800, 8910(i), 9300(i), 9500, N-Gage (QD).

Will NOT work on some of DCT4 generation, like:
1100(B), 1101, 1110, 1112(i), 1600, 2300, 2310, 2600, 2610, 2650, 2652, 6030(B), 6060, 6111.

Will NOT work on any of BB5 generation (all newest phones), like:
3250, 5300, 5400, 5500, 6125, 6131, 6233, 6234, 6280, 6282, 6630, 6680, 6681, 6682, 7370, 7373, 7390, all E-series, all N-series.

PC Version:

SIS Version:

JAVA Version:

----------------------------------------------------------------------------------------------------------------------------------------

Software used to read the security code of DCT4 phone. You can use this software via IRDA, Bluetooth or Cables


----------------------------------------------------------------------------------------------------------------------------------------

NKGsM DCT4 Calculator + Mastercode v0.91c


----------------------------------------------------------------------------------------------------------------------------------------

WorldUnlock Calculator v4.4

Use the software to:

Unlock Nokia
Unlock LG
Unlock Panasonic
Unlock Maxon
Unlock Samsung
Unlock AEG/Telital
Unlock Alcatel
Unlock Siemens
Unlock Sony
Unlock Vitel

But be aware, many of the none IMEI generated codes do not work perfectly. The tool is BEST for Nokia unlocking!

Easy guide to free Nokia unlocking:
(Please read the whole guide before starting)

1. Select phone model from list.
2. Enter IMEI number of your phone (Press *#06# on phone)
3. Select country and service provider where the phone was bought.
4. Hit the button: Calculate!

5. The software generate some Nokia unlock codes.
6. If 7 codes are displayed, use the code ending with +7 first.
7. If it does not work, then try +1, and finaly +5.
8. When phone displays "Sim restriction off" it is unlocked.
9. If only two codes are displayed (+1 and +2) enter both of them!

Codes will be shown on the form: #pw+CODE+n#
To get p, w or +, pres the * button several times.

You enter the codes correctly by removing any simcard from the phone, turning the phone on and then enter the code.

Important
You only have 5 tries to enter the correct unlocking code, if all 5 times fail you have to unlock it by cable.


BB5 Calculator/Unlocker

1. Connect DKU-5 or normal COM cable to computer
2. Set proper COM cable (must be, between 1 and 9)
3. Download unlocker, run `install.bat`
4. Open file c:/bb5_unlocker/logs/bb5_unlocker.cfg and write here proper COM port (1-9)
5. Run c:/bb5 unlocker/BB5logunlocker.exe
6. Click READ PHONE
7. Click MAKE LOG, log will be created
8. Enter codes to phone (in /psw/ dir), or
9. Click SP UNLOCK to enter codes via FBUS

IMPORTANT
Logger works for BB5 with rap3g v2.11 to v2.20.
Calculator works for any BB5 phone,

this another good info from slobodan andric from another well known forum:

******* CONNECTION ******

For this program you need Fbus cable like DK5, CA43 or similar conected to ports from COM1 to COM9.
First unpack zip fiole and strat install.bat

In file "c:\bb5_unlocker\logs\bb5_unlocker.cfg" with any text editor change your COM port setings!

******* USING ********

Program can be started successfully only if is COM port in file "c:\bb5_unlocker\logs\bb5_unlocker.cfg" adjusted properly.

READ PHONE:
***********
Reading info data from phone and making BACKUP file for that phone( Field 308,1).

IMPORTANT DO NOT delete or modify that file because can save your *** if something goes wrong.

WR BACKUP:
***********
With that function can write backup file with Field 308,1 if exist in BACKUP folder.

MAKE LOG:
***********

Function for making log file . With that log file BB5_calc.exe calculating codes for unlock.
Working with BB5 phones with RAP3G v.2.x (6630,6680,6681,6682,n70,n90).
IMPORTANT phone must be without Sim card.

SP UNLOCK:
***********
Making unlock with codes calculated by BB5_calc.exe.

SP UNLOCK PROCEDURE

Connect cable to PC and be shure com port is adjusted properly
Start BB5logunlocker.exe
Connect phone and switch on without Sim card.
press button READ PHONE and wait until get the message DONE.
If is everything correct you will see info from phone on screen.
Pres button make log and wait until get mesage done.
Log file is in folder LOGS.
Start BB5_calc.exe to make for you PSW file in folder PSW
Press button SP UNLOCK and unlock your phone.

That is all folks

If you got unlock codes from your provider and you used all yours 3 attempts
to enter code via keypad then do the following:
into dir "c:\bb5_unlocker\psw" create a file "aaaaaaaaaaaaaaa_BB5.psw" where is "aaaaaaaaaaaaaaa" enter your phones imei
then in that created file enter in the files start "#pw+bbbbbbbbbbbbbbb+c#" where is "bbbbbbbbbbbbbbb"
enter your unlock code and where is "c" enter your logs level number (1-7).
save the file and use "SP UNLOCK" function

SO THIS DEFINITLEY WORKING
my thanks to dejan kaljevic for giving "for free"this long awaited software

Works with:
Nokia 6630 RAP3G v2.10E PA
Nokia 6680 RAP3G v2.0E PA
Nokia 6681 RAP3G v2.0E PA
Nokia E60 RAP3G v2.20E PA
Nokia E65 RAP3G v2.20E PA
Nokia E70 RAP3G v2.20E PA
Nokia N70 RAP3G v2.20 PA
Nokia N71 RAP3G v2.20 PA
Nokia N90 RAP3G v2.11 PA
Nokia N91 RAP3G v2.20E PA
Nokia N93 RAP3GS v2.0E PA


Enjoy!

 ;) ;) ;) ;) ;) ;) ;)

Guys, I don't think the password works, I tried to typed it but the file didn't extract after I downloaded it, a help please!! Thx a million

 :D :D

 :D :D :D

Good information about the unlock codes... For free unlock codes just click with this site http://www.mobile-unlocker.com/ for GSM mobiles... I too unlocked my mobile from here only...